This can be caused by numerous issues in the pump from the check valves, seals, unloader, ez start valve and so on. This is a complete head that comes with all the check valves, seals, unloader, everything you will need if you have lost pressure. And the good thing is that it will work on the EZ and the EZ-SX versions of the pump. It is OEM part and all you will need to do is bolt it back on. The only thing we recommend checking are the pistons.
Just make sure they are not scratched and they still move up and down. If they do then all you will need to do is copy this number and paste it in the search bar -- 251021774016. If you just want the pump complete check our ad to verify which version you have before ordering. This Is An Update For Customers Just Looking For A Head. If Your Pistons Are Moving Check These Two Items Out.
Not Sure What is Wrong With Your Pump? No Guessing and No Replacing Parts and Realizing Your Pump Still Doesn't Work! By far the question we are asked the most is how to tell which pump the customer has. AR does label their RMW pumps but they do not mark on that label whether it is the EZ or the EZ-SX pump.
There are two ways to tell which pump you have. The first way is to look at the direction your inlet and outlet tube face in relation to where the spark plug is located.
If the tubes go out the same side as the spark plug then you have the EZ version. If your inlet and outlet tube come out opposite the spark plug then get the EZ-SX version of the pump.The second way to tell which version you have is lay the three legs of the pump flat on a table with the inlet and outlet tube facing you. Look at the legs of the pump and take note of the leg that has large hole in it. If that leg is positioned at 2 o'clock then you have the EZ version.
If it is at 7 o'clock then you have the EZ-SX version. Item number for the 14 Surface Cleaner. This surface cleaner works great for these smaller pumps.
Item number for the RMW2.2G24EZ: 251093240027. Item number for the Key to connect the motor shaft to the pump shaft. Item Number for Pump Saver: 251379161001.
Item Number for 25' Pressure Washer Hose. Item Number for Pressure Washer Nozzles: 261031769192. Item Number for Chemical Injector Line. Repair Parts for RMW2.2G24 Pumps (EZ or EZ-SX). Note: While there are cheaper replacement vertical pumps out there not all pumps are the same.Can you get parts for your pump if something minor goes wrong? In our repair shop we have worked on thousands of pressure washers. Our biggest problem we face when the cheaper pumps come in for repairs is if we can get parts for them - and many times the answer is no. All the pumps we sell we can get parts for (even if they are made overseas) or have them in stock. Direct Replacement for most vertical shaft pumps. Pump mounts directly to motor and inlet and outlet tube goes out out of the frame opposite the side the spark plug is on. 2.2 gallons per minute at 2400psi. Bolts directly to 3-7.25 hp motor with 7/8 crankshaft at 3400 RPMs. Comes standard with chemical injector and built in unloader. You simply remove your old pump and bolt the new one on. We list the item number for you to copy and paste to quickly find their listings. If you have the Devilbiss oil-less "bowtie" pump you will also need the key to connect your motor crankshaft and the pump shaft- the link is below. We also have pump saver which is used to protect your pump from corrosion. Also listed below are the correct size spray tips for your pump and 25' pressure washer hoses rated at 3200 psi.
More than likely we have it. We have been working on pressure washers for more than 20 years and can help you troubleshoot your problem. Please make sure that you check and recheck to see that the pump you order is the correct pump you need. Our goal is to get you everything you need quickly and efficiently. I tem number for the 14 Surface Cleaner.
Item number for the RMW2.2G24EZ-SZ: 280800874061. We are an authorized service center for many of the manufacturers and can provide you with technical help. Exceptions may occur only when customer provides P. Box and not a physical address.
Damages: If an item is damaged, please inform the driver and contact the carrier immediately. Also, take notes of the damage and pictures of the item and box. Damages will be handled immediately but credit cannot be given until the item is received. Feedback: Feedback is very important to us.Good communication will fix most problems. Once you leave feedback, we will do the same.