This 3000 PSI replacement pump made by Danau is not designed for commercial or daily use but is great for the DIYer. It includes a built in unloader, a thermal relief valve, and a chemical injector.
This pump is completely rebuildable from the valves to the packings and unloader. If you need a pump for more frequent or commercial use, check out our listing: for a Mi-T-M Mi3-0414. 3000 PSI Pressure Washer Replacement Pump Horizontal Shaft Cat General AR 3/4.
How to tell if this is the correct pump for your washer. It will fit most HORIZONTAL shaft engines with a 3/4 diameter shaft. The shaft should be approximately 2 inches long. If your shaft is very short and is a 7/8 shaft, this pump WILL NOT FIT. The pump bolts to the motor with a 4 bolt pattern where each bolt hole is about 2 1/2 apart.
If you have an Excell pressure washer with a plastic shroud plelase be sure to check your crankshaft before ordering. You will need to use your keyway & bolts from your old pump.Ordering Replacement pumps can be tricky. Availability : We keep the majority of our items IN STOCK in our retail store. Please return items in the same type packaging as they were sent to you. We have been in business for over 12 years and have a knowledgeable repair and sales staff. Unlike many online sellers, we do stock parts at our physical store location.
We know our equipment and parts and can assist you with any questions you may have. Special Requests : Since we are an Authorized Distributor, we have a full line of parts available that are not all listed online. We do offer Bulk Discounts on Items.