AR Annovi Reverberi SRMW2.2G26EZ. By far the question we are asked the most is how to tell which pump the customer has. AR does label their RMW pumps but they do not mark on that label whether it is the EZ or the EZ-SX pump. There are two ways to tell which pump you have.
The first way is to look at the direction your inlet and outlet tube face in relation to where the spark plug is located. If the tubes go out the same side as the spark plug then you have the EZ version. If your inlet and outlet tube come out opposite the spark plug then get the EZ-SX version of the pump. The second way to tell which version you have is lay the three legs of the pump flat on a table with the inlet and outlet tube facing you. Look at the legs of the pump and take note of the leg that has large hole in it.
If that leg is positioned at 2 o'clock then you have the EZ version. If it is at 7 o'clock then you have the EZ-SX version. Item number for the 14 Surface Cleaner. This surface cleaner works great for these smaller pumps.
Item number for the RMW2.2G24EZ-SZ: 280800874061. Item number for the Key to connect the motor shaft to the pump shaft. Item Number for Pump Saver: 251379161001. Item Number for 25' Pressure Washer Hose. Item Number for Pressure Washer Nozzles: 261031769192.
Item Number for Chemical Injector Line. Note: While there are cheaper replacement vertical pumps out there not all pumps are the same.
Can you get parts for your pump if something minor goes wrong? In our repair shop we have worked on thousands of pressure washers. Our biggest problem we face when the cheaper pumps come in for repairs is if we can get parts for them - and many times the answer is no. All the pumps we sell we can get parts for (even if they are made overseas) or have them in stock. Direct Replacement for most vertical shaft pumps.
Pump mounts directly to motor and inlet and outlet tube goes out the front of the frame (if spark plug is in front of frame). 2.2 gallons per minute at 2600psi. Bolts directly to 3-7.25 hp motor with 7/8 crankshaft at 3400 RPMs.
Comes standard with chemical injector and built in unloader. You simply remove your old pump and bolt the new one on. We list the item number for you to copy and paste to quickly find their listings.These pumps do have a thermal relief valve on the pump. We also have pump saver which is used to protect your pump from corrosion. We have been working on pressure washers for more than 20 years and can help you troubleshoot your problem.
We are an authorized service center for many of the manufacturers and can provide you with technical help. Because we sell at our retail location and in other places on the internet we sell hundreds of items per week and there are times when we will back order items while waiting for our new stock to arrive. Exceptions may occur only when customer provides P. Box and not a physical address.Damages: If an item is damaged, please inform the driver and contact the carrier immediately. Also, take notes of the damage and pictures of the item and box. Damages will be handled immediately but credit cannot be given until the item is received. Feedback: Feedback is very important to us. Good communication will fix most problems.
Once you leave feedback, we will do the same. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Pressure Washer Parts". The seller is "americanairless" and is located in this country: US. This item can be shipped to United States.